2003 Spoke N
2 posters
Page 1 of 1
2003 Spoke N
I know, I know, it just doesnt sound right, but thats what I got and I am considering Darkside.
So with a 15" rim and the N fender, can I stick a 205/70/15 in there? Also what is the height VS a stock MC. Looks to me like I will gain height and width?
So with a 15" rim and the N fender, can I stick a 205/70/15 in there? Also what is the height VS a stock MC. Looks to me like I will gain height and width?
Sailor77- Number of posts : 2
Location : Fort Wayne IN
Registration date : 2010-07-19
Re: 2003 Spoke N
On more thing to note. Would I use regular weights to balance?
Sailor77- Number of posts : 2
Location : Fort Wayne IN
Registration date : 2010-07-19
Re: 2003 Spoke N
Try these for tire height/width comparisons: http://www.tacomaworld.com/forum/tirecalc.php and http://www.barretire.com/calculator.htmSailor77 wrote:I know, I know, it just doesnt sound right, but thats what I got and I am considering Darkside.
So with a 15" rim and the N fender, can I stick a 205/70/15 in there? Also what is the height VS a stock MC. Looks to me like I will gain height and width?
Dyna Beads or regular balancing. Your rear inner tube has a 90 bend in it. It is not a sharp bend, so the beads should go through OK.
It seems that spoke rims are sometimes a problematic in getting the beads to seal when mounting a CT. You may want to do some more research on it.
RedTide- Number of posts : 20
Location : Georgia
Registration date : 2010-06-29
Similar topics
» Want to convert 1800S to darkside recomend:
» Car Tire For Rear
» Balancing a spoke?
» Spoke Cleaning
» spoke question
» Car Tire For Rear
» Balancing a spoke?
» Spoke Cleaning
» spoke question
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|