Dyna bead dealer
+3
DS-Wing-Nut
Gary in Indiana
smokey2255
7 posters
Page 1 of 1
Dyna bead dealer
Anyone interested in running the dynabeads in your bike, Gary in Indiana is a dealer. Here is his email address if you have any questions that can not be answered on the forums try him. Also to place orders email him with dynabead order in the subject line.
gk6854@aol.com
You will find Gary a great guy to deal with.
Smokey
gk6854@aol.com
You will find Gary a great guy to deal with.
Smokey
smokey2255- Admin
- Number of posts : 2451
Age : 57
Location : Westfield Illinois
Registration date : 2007-12-14
Re: Dyna bead dealer
Wow, thanks for the kind words, Smokey. I really appreciate it.
I've had more than a few people who run car tires on their bikes use Dyna Beads with great success. If any of you are interested in learning more about them, the manufacturer has a great website at;
www.innovativebalancing.com
If you have any questions not answered there, fell free to email me and I'll be happy to help you out. Also, if you decide you'd like to have some Dyna Beads for your bike and save some money, too, just drop me an email at;
gk6854@aol.com
:bball:
I've had more than a few people who run car tires on their bikes use Dyna Beads with great success. If any of you are interested in learning more about them, the manufacturer has a great website at;
www.innovativebalancing.com
If you have any questions not answered there, fell free to email me and I'll be happy to help you out. Also, if you decide you'd like to have some Dyna Beads for your bike and save some money, too, just drop me an email at;
gk6854@aol.com
:bball:
Gary in Indiana- Number of posts : 11
Location : Fort Wayne, IN
Registration date : 2007-12-30
Re: Dyna bead dealer
I just installed 3 ounces in my rear CT.. .... (and removed my balancing weights, of course). WOW... this is nice.
I didn't think I'd notice the difference but you can or I did.
I'm going to get some more for the front tire!
Very easy to install.... I lifted the bike to get the rear tire off the ground and the weight of the bike too.
removed the valve stem core and installed the beads per mfg. recommendations. went in alot easier than I thought they would.
reinstalled the valve stem core, inflated the tire, lowered the bike, checked the air pressure.. and went for a ride..... Very nice!!
I'll use these in every tire from now one.
I didn't think I'd notice the difference but you can or I did.
I'm going to get some more for the front tire!
Very easy to install.... I lifted the bike to get the rear tire off the ground and the weight of the bike too.
removed the valve stem core and installed the beads per mfg. recommendations. went in alot easier than I thought they would.
reinstalled the valve stem core, inflated the tire, lowered the bike, checked the air pressure.. and went for a ride..... Very nice!!
I'll use these in every tire from now one.
DS-Wing-Nut- Number of posts : 328
Age : 57
Location : Ennis, Texas
Registration date : 2008-02-02
Discussion on Dynabeads
Heres a thread link to a discussion on how Dynabeads work. BTW Gary thanks for getting me the Dynabeads so quickly.
https://mcdarksiders.forumotion.com/honda-vt-1100-f16/dynabeads-t471.htm
https://mcdarksiders.forumotion.com/honda-vt-1100-f16/dynabeads-t471.htm
Muntz- Uber User
- Number of posts : 1907
Age : 56
Location : Laplace LA
Registration date : 2007-12-17
Re: Dyna bead dealer
It really is amazing what a difference something like this can make. To look at a bag holding two or three ounces, you'd never believe it. I know I didn't.
I'm very happy to report that everyone who's ever tried them has been pleased with them. Even the most ardent and adament skeptics will admit that "it's no worse than with the weights" and I take that as almost a greater compliment to them.
I try to get these on their way to folks within 24 hours of getting the order. I'm glad to hear that they're arriving in a prompt fashion.
I'm very happy to report that everyone who's ever tried them has been pleased with them. Even the most ardent and adament skeptics will admit that "it's no worse than with the weights" and I take that as almost a greater compliment to them.
I try to get these on their way to folks within 24 hours of getting the order. I'm glad to hear that they're arriving in a prompt fashion.
Gary in Indiana- Number of posts : 11
Location : Fort Wayne, IN
Registration date : 2007-12-30
Re: Dyna bead dealer
Gary in Indiana wrote:It really is amazing what a difference something like this can make. To look at a bag holding two or three ounces, you'd never believe it. I know I didn't.
I'm very happy to report that everyone who's ever tried them has been pleased with them. Even the most ardent and adament skeptics will admit that "it's no worse than with the weights" and I take that as almost a greater compliment to them.
I try to get these on their way to folks within 24 hours of getting the order. I'm glad to hear that they're arriving in a prompt fashion.
Gary,
Us darksiders of all should know that if it didn't work, you couldn't sell them. Sorta like the darkside, if it didn't work, our forum would be closed down in a week... Just because it doesn't seem it would work, doesn't mean it wont.................... I going here soon, front and rear on my ride and get rid of the weights.
.....................bobby
.
twin1300- Admin
- Number of posts : 4689
Age : 64
Location : Denham Springs, La.
Registration date : 2007-12-14
Re: Dyna bead dealer
twin1300 wrote:Gary in Indiana wrote:It really is amazing what a difference something like this can make. To look at a bag holding two or three ounces, you'd never believe it. I know I didn't.
I'm very happy to report that everyone who's ever tried them has been pleased with them. Even the most ardent and adament skeptics will admit that "it's no worse than with the weights" and I take that as almost a greater compliment to them.
I try to get these on their way to folks within 24 hours of getting the order. I'm glad to hear that they're arriving in a prompt fashion.
Gary,
Us darksiders of all should know that if it didn't work, you couldn't sell them. Sorta like the darkside, if it didn't work, our forum would be closed down in a week... Just because it doesn't seem it would work, doesn't mean it wont.................... I going here soon, front and rear on my ride and get rid of the weights..
I guess the thing that tells me that they must be working are the number of second orders I get from people. I'll have someone order enough for one bike and then a week or so later get an email from them asking about Dyna Beads for another bike or a trailer, truck or SUV because of the experience with the first vehicle in which they used the Dyna Beads. It's really been gratifying to see how happy everyone has been with them.
I think the next thing I'll be hearing about is going to be a lack tire cupping and no more premature tire wear.
Gary in Indiana- Number of posts : 11
Location : Fort Wayne, IN
Registration date : 2007-12-30
Re: Dyna bead dealer
Ordered mine on Wed.....had them Sat. Gary you are the man...very easy to deal with and very fast service......Oh yea great price for what you get..
Thank you,
Jerry
Thank you,
Jerry
jedishon- Super User
- Number of posts : 4436
Age : 73
Location : Rogersville, Al
Registration date : 2007-12-18
Re: Dyna bead dealer
jedishon wrote:Ordered mine on Wed.....had them Sat. Gary you are the man...very easy to deal with and very fast service......Oh yea great price for what you get..
Thank you,
Jerry
Jerry,
I'm happy to hear how pleased you are. Let us know how you like them once you get them installed and get some miles on.
Take care and ride safely,
Gary
Gary in Indiana- Number of posts : 11
Location : Fort Wayne, IN
Registration date : 2007-12-30
Re: Dyna bead dealer
Toasted_311 wrote:Hmmm...wonder if I should get some?
I don't know what to tell you. It's something different from "the way it's always been done." You wouldn't want to do anything our of the norm or unconventional, would you?
Gary in Indiana- Number of posts : 11
Location : Fort Wayne, IN
Registration date : 2007-12-30
Re: Dyna bead dealer
Gary in Indiana wrote:Toasted_311 wrote:Hmmm...wonder if I should get some?
I don't know what to tell you. It's something different from "the way it's always been done." You wouldn't want to do anything our of the norm or unconventional, would you?
Not here Gary.....we only follow tradition and NEVER would do anything against the flow...
.
twin1300- Admin
- Number of posts : 4689
Age : 64
Location : Denham Springs, La.
Registration date : 2007-12-14
Similar topics
» Dynabead like tech
» Balancing beads
» vtx dark side splines
» internet tire dealer
» Wizards Cleaning Products - New Dealer
» Balancing beads
» vtx dark side splines
» internet tire dealer
» Wizards Cleaning Products - New Dealer
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|