Will this work?
3 posters
Page 1 of 1
Will this work?
Lou Fri Oct 15, 2010 7:03 pm
New to the site -needed info on going to a 175/75 -16 on my 1500GL made contact with Saibeer now just waiting for one
other responce. I have one question which needs to be resolved. When you compair the section width of the Dunlop E3 thats now on,
to the section width of Austone !75/75-16 the Austone is .59in wider. Present clearence is apx. 7/16in. from the swingarm.
This seems to me not enough room,or because of the narrower rim on the bike bring the sidewall in to clear
the swinarm?
Points of view would be appreciated.
Lou.
other responce. I have one question which needs to be resolved. When you compair the section width of the Dunlop E3 thats now on,
to the section width of Austone !75/75-16 the Austone is .59in wider. Present clearence is apx. 7/16in. from the swingarm.
This seems to me not enough room,or because of the narrower rim on the bike bring the sidewall in to clear
the swinarm?
Points of view would be appreciated.
Lou.
Lou- Number of posts : 80
Age : 90
Location : Courtenay B C
Registration date : 2010-10-13
Re: Will this work?
nodakbassmaster Sat Oct 16, 2010 3:34 am
narrower rim will cause the overall width of the tire to be decreased a lil bit
nodakbassmaster- Admin
- Number of posts : 1604
Age : 45
Location : Rapid City, SD
Registration date : 2007-12-15
Re: Will this work?
quadancer Sat Oct 16, 2010 9:02 am
yeah, if it weren't for that, my Heritage wouldn't be DS with the 175mm.
quadancer- Number of posts : 1245
Age : 70
Location : Acworth, Ga.
Registration date : 2010-05-02
Similar topicsPage 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|