Riding on the Darkside
Would you like to react to this message? Create an account in a few clicks or log in to continue.
Riding on the Darkside

Gathering place for those willing to run on the Darkside.


R Fitment and the Goodyear Assurance Triple Tred

3 posters

Riding on the Darkside :: VTX 1300 Tech

Go down

R Fitment and the Goodyear Assurance Triple Tred Empty R Fitment and the Goodyear Assurance Triple Tred

Post  Rmnc3 Tue Jun 30, 2009 9:57 pm

Hej,
I shoulda run this by before I ordered it, but
will a Goodyear Assurance Triple tred 205/70/15 fit the R?
The several posts I've seen for this tire are Cs.
Any installation caveats? The bead seems to seat at 90psi.
Any special lube?
Put Dyna Beads in during or after?
Remove the helmet lock?
Any removal of material inside the fender well?
Thanks!
RixRad
Rmnc3
Rmnc3

Number of posts : 12
Age : 61
Location : Lakewood, CA
Registration date : 2007-12-25

http://www.montereylighting.com

Back to top Go down

R Fitment and the Goodyear Assurance Triple Tred Empty Re: R Fitment and the Goodyear Assurance Triple Tred

Post  wayne Tue Jun 30, 2009 11:45 pm

All I can tell you is it will fit. Cs have a mag and the Rs have a mag, just a differant look.
No, mods to get it to fit.
We just mounted a 205-70-15 on a S model, and it has the same finder, and I just use dish soapfor lube.

wayne

Number of posts : 623
Age : 72
Location : Roseburg OR.
Registration date : 2007-12-18

Back to top Go down

R Fitment and the Goodyear Assurance Triple Tred Empty Re: R Fitment and the Goodyear Assurance Triple Tred

Post  horseman8m Wed Jul 01, 2009 12:17 am

don't forget the moly paste for the splines .
good luck, cheers cheers cheers cheers cheers
Horse
horseman8m
horseman8m

Number of posts : 1449
Age : 35
Location : valdosta , GA.
Registration date : 2008-02-09

Back to top Go down

R Fitment and the Goodyear Assurance Triple Tred Empty Re: R Fitment and the Goodyear Assurance Triple Tred

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

Riding on the Darkside :: VTX 1300 Tech

 
Permissions in this forum:
You cannot reply to topics in this forum