New Crap-Mod. - My Custom Lowers
+3
Steve-O
Badmoon
DS-Wing-Nut
7 posters
Page 1 of 1
New Crap-Mod. - My Custom Lowers
I already had a set of Memphis Fats Lowers to go with the Windshield. I really liked them but I was still getting wind and buffeting where I didn't want it. So, I experimented while riding and moving the lowers around but in the end found that the size of these lowers was entirely too small for my taste. So, off to Lowe's I go. Pick up some Lucite that is almost 1/4" thick. Very close if not the same as my original lowers. I didn't want to have to make any new hardware connections as I really like the ones that Memphis provides. I made a pattern, well actually 4 coroplast (plastic cardboard) patterns untill I got one that I really liked. Then I went into the shop and drew the pattern on the 1/2" particle board pattern on the band saw and then scroll saw and then sanded it to final measurements and smoothness. Cut the Lucite to size. I have a router table and mounted the trim bit with bearing.
I used double stick tape and mounted my pattern to one of the pieces of lucite (with the protective layer still on). Used the router to cut the lowers. WORKED LIKE A CHARM!!! I got two exact copies. Removed the old lowers and the mounting hardware. Drilled holes and inserted the rubber bushings and put it all back together! Took her for a ride and out on the highway! WOW... what a MAJOR difference. I love them. I got it up to 80 and had very little wind whatsoever. I'm a very happy camper. They are big, a little wider and alot longer. But I don't think they look that bad?? What say you guys?! I know some will like them and some will not.. That's OK.
Here are some pics...
I used double stick tape and mounted my pattern to one of the pieces of lucite (with the protective layer still on). Used the router to cut the lowers. WORKED LIKE A CHARM!!! I got two exact copies. Removed the old lowers and the mounting hardware. Drilled holes and inserted the rubber bushings and put it all back together! Took her for a ride and out on the highway! WOW... what a MAJOR difference. I love them. I got it up to 80 and had very little wind whatsoever. I'm a very happy camper. They are big, a little wider and alot longer. But I don't think they look that bad?? What say you guys?! I know some will like them and some will not.. That's OK.
Here are some pics...
DS-Wing-Nut- Number of posts : 328
Age : 57
Location : Ennis, Texas
Registration date : 2008-02-02
Re: New Crap-Mod. - My Custom Lowers
Here are the pics...........
Particle board pattern.
Router Table seup.
More Router Table and Lucite Snow!!
Hard to see them in this pic, Sorry.
Particle board pattern.
Router Table seup.
More Router Table and Lucite Snow!!
Hard to see them in this pic, Sorry.
DS-Wing-Nut- Number of posts : 328
Age : 57
Location : Ennis, Texas
Registration date : 2008-02-02
I almost Forgot!!
Only $15 + tax and then my labor... THUMBS UP!!!
DS-Wing-Nut- Number of posts : 328
Age : 57
Location : Ennis, Texas
Registration date : 2008-02-02
Re: New Crap-Mod. - My Custom Lowers
I like that. And no bugs on the forks. Looks great. I like the all clear. Dont notice them in the pics unless you are looking. Did I say I like them?
Great job and thanks for posting them. Now go ride.
Moon
Great job and thanks for posting them. Now go ride.
Moon
Badmoon- Number of posts : 1699
Age : 57
Location : Swanpland (Gods Country) It is my horns that hold up my halo.
Registration date : 2007-12-20
Re: New Crap-Mod. - My Custom Lowers
Nice mod Dave! Save that pattern. I have a clear memphis shad windshield. I'd like to try a set of these lowers with that to see how it does. Especially when it's bug season.
See you on the 30th.
See you on the 30th.
Steve-O- Moderate user
- Number of posts : 1153
Age : 65
Location : Dallas, TX
Registration date : 2008-02-05
Re: New Crap-Mod. - My Custom Lowers
I smell C.R.A.P
TennX- Number of posts : 143
Age : 76
Location : Memphis,Tn.
Registration date : 2007-12-15
Re: New Crap-Mod. - My Custom Lowers
TennX wrote:I smell C.R.A.P
Already posted it over there as well! thanks!
DS-Wing-Nut- Number of posts : 328
Age : 57
Location : Ennis, Texas
Registration date : 2008-02-02
Re: New Crap-Mod. - My Custom Lowers
I hate it ...... cause I don't have a set yet After this weekend and fighting the wind at interstate speeds I know I need to get me a set. I really like the looks of those. They are long enough and strong enough to do you some good and to keep the wind off you. Very well done.
See you out there
Smokey
See you out there
Smokey
smokey2255- Admin
- Number of posts : 2451
Age : 57
Location : Westfield Illinois
Registration date : 2007-12-14
Re: New Crap-Mod. - My Custom Lowers
Very professional job the Darkside Shadow!
.....................bobby
.
.....................bobby
.
twin1300- Admin
- Number of posts : 4689
Age : 64
Location : Denham Springs, La.
Registration date : 2007-12-14
Re: New Crap-Mod. - My Custom Lowers
Looks like time to start a little side business.
Muntz- Uber User
- Number of posts : 1907
Age : 56
Location : Laplace LA
Registration date : 2007-12-17
Similar topics
» Lookin for lowers
» Memphis Shade Lowers on a VT1100C14
» Holesaw Mod and Holy Crap!
» This is bull crap
» First crap mod..making a GPS fit
» Memphis Shade Lowers on a VT1100C14
» Holesaw Mod and Holy Crap!
» This is bull crap
» First crap mod..making a GPS fit
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|