Tightened the Steering
3 posters
Page 1 of 1
Tightened the Steering
Last year I had the steering bearings replaced and asked the dealer to tighten the steering to a ten pound pull. I didn't think that they tightened it down to what I requested, but it felt OK so I just kept riding it.
This winter I went Darkside and switched out the spoked rims to a "C" rims. The steering felt a lot looser with the thinner tire and I experienced the high speed wobble for the first time since I've owned it.
So this morning I decided to tighten it down, rather that enjoy the nice weather and go for a ride. It really didn't take very long to take it apart and make the adjustment. I didn't check the pull weight, I just went by feel.
I went for a test ride and what a world of difference! The steering felt smoother and I felt more in control. I didn't take it over 70 MPH but I don't think it's going to be a problem when I hit the higher speeds.
This winter I went Darkside and switched out the spoked rims to a "C" rims. The steering felt a lot looser with the thinner tire and I experienced the high speed wobble for the first time since I've owned it.
So this morning I decided to tighten it down, rather that enjoy the nice weather and go for a ride. It really didn't take very long to take it apart and make the adjustment. I didn't check the pull weight, I just went by feel.
I went for a test ride and what a world of difference! The steering felt smoother and I felt more in control. I didn't take it over 70 MPH but I don't think it's going to be a problem when I hit the higher speeds.
Re: Tightened the Steering
did you say you have the taper bearings in there , like the 1800's have .
That is what i am going to do with mine , replace the ball bearings with the taper bearings.
people I have talked to say they can sure feel the deference.
thanks for the write-up , things like this help everyone.
That is what i am going to do with mine , replace the ball bearings with the taper bearings.
people I have talked to say they can sure feel the deference.
thanks for the write-up , things like this help everyone.
horseman8m- Number of posts : 1449
Age : 35
Location : valdosta , GA.
Registration date : 2008-02-09
Re: Tightened the Steering
Did the allballs changeout last month and OMG , I can't believe I was riding on those puny bearings that honda put in. Yes, the ride is 100% better and my only regret is that we didn't do it sooner.
kermit- Number of posts : 389
Location : Texarkana, Arkansas
Registration date : 2008-01-14
Similar topics
» steering head bearing
» Steering head bearing adjustment
» Sensitive steering and high speed wobble
» Replacing steering head bearings before Rally!!!
» Steering Stablizer for kawasaki Voyager 1700.
» Steering head bearing adjustment
» Sensitive steering and high speed wobble
» Replacing steering head bearings before Rally!!!
» Steering Stablizer for kawasaki Voyager 1700.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|