New to the site
5 posters
Page 1 of 1
New to the site
Hello fellow VTX'ers. I will be going to the DARKSIDE soon, can anybody tell me who sells moly paste? auto parts store? bike shop? wally world? thanks Bill
tallbill17- Number of posts : 13
Location : jacksonville florida
Registration date : 2009-05-08
Re: New to the site
Got mine at the Honda shop. It's hard to find. Tried tractor supply stores, trucking firm, and hardware stores with no luck other than the Honda store. Other brands of bike stores didn't have it either. When you apply it try to keep it from touching anything but the splines (including your hands), cause it's almost impossible to get off.
c4grunt- Number of posts : 14
Location : Salem, Ohio
Registration date : 2009-02-28
Re: New to the site
okay thanks for the info... how much does the stealer get for it?
tallbill17- Number of posts : 13
Location : jacksonville florida
Registration date : 2009-05-08
Re: New to the site
Moly grease has 3% molybdenum disulphide so most is just grease, but moly paste it has to be 60% or more molybdenum disulphide ,
the best place to find it is internet search
auto race supply ( Moroso 35000 Assembly Lubricant, Moly Paste )
motorcycle supply ( Honda Moly 60 paste) , ( LocTite Moly paste) , ( TS-70 Moly Paste, 4 oz. $14 from TSMoly. (800) 508-5545 )
I use TS-70 Moly Paste it is 70% molybdenum disulphide , 1lb can about $40. , but i use it on aircraft that i work on.
good luck
Horse
the best place to find it is internet search
auto race supply ( Moroso 35000 Assembly Lubricant, Moly Paste )
motorcycle supply ( Honda Moly 60 paste) , ( LocTite Moly paste) , ( TS-70 Moly Paste, 4 oz. $14 from TSMoly. (800) 508-5545 )
I use TS-70 Moly Paste it is 70% molybdenum disulphide , 1lb can about $40. , but i use it on aircraft that i work on.
good luck
Horse
Last edited by horseman8m on Sat May 09, 2009 3:22 pm; edited 1 time in total
horseman8m- Number of posts : 1449
Age : 35
Location : valdosta , GA.
Registration date : 2008-02-09
Re: New to the site
The local Bumper-to-Bumper special ordered some Loctite Moly Paste for my friend which shared it with me. I think there is enough to do about 2736 motorcycles per can.
[img][/img]
[img][/img]
GarMan- Number of posts : 16
Location : Alabama
Registration date : 2009-02-20
molypaste
Ok I found some on ebay also, theres a honda shop that has a tube looks like maybe about 3 ozs. How much does it take to do the job? Thanks Guys
tallbill17- Number of posts : 13
Location : jacksonville florida
Registration date : 2009-05-08
Re: New to the site
Doesn't take much. The tube I got from the Honda shop will last me a long time, for sure.
Turdboy- Number of posts : 25
Age : 64
Location : Lovell, WY
Registration date : 2008-05-21
Re: New to the site
wipe off the old stuff, and brush on just enough to coat the splines ,, done
horseman8m- Number of posts : 1449
Age : 35
Location : valdosta , GA.
Registration date : 2008-02-09
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|