2012 Goldwing and Balance beads

I am getting ready to put a new rear tire on and my bike has the TMS can you run the beads with this or will it cause problems. Thanks in Advance.

I've got 15K on my Alpin with Dynabeads. I reverse programed my sensors and have no problem with the sensors working like they're suppose to!

Look into RideOn? I sure wish I'd also put it in the front tire before last Sat. - had a hole, and dynabeads were squeezing out of it. RideOn would have sealed it
whilst riding. We were ripping some twisties and ALL OF A SUDDEN, my bike doesn't want to lean, handlebars resisting me a LOT. Thot it was the back, but
it was the front. We plugged her up and all is fine, holding air still. Nail or whatever must still be inside the tire, but I need a new one anyway.
And some RideOn.

DO NOT USE RIDE ON WITH 2009-2013 GOLDWING TPMS SENSORS!!!


The TPMS sensors on late model Honda Goldwings (2009, 2010, 2012) are not sealed with an epoxy coating. Just using your hands, you can snap open these sensors. This leaves the sensor’s innards (battery and electronics) particularly vulnerable to any moisture/vapor or liquid. Therefore, the makers of Ride ON recommend that all of our dealers and customers refrain from installing Ride-On in late model Honda Goldwings.

http://www.ride-on.com/tpms