1400 Intruder
+3
M50
Steve-O
the Ricker
7 posters
Page 1 of 1
1400 Intruder
I am running a Barum Bravuris 205/65 r15 on my stock swing arm. It is a close fit, but it does fit.
My rear shocks are lowered about 2 coils and I still have clearance. The inside rim bead on the rim MUST be ground down smooth for this tire to seat.
I love the looks and the ride!
:pirat:
the Ricker
My rear shocks are lowered about 2 coils and I still have clearance. The inside rim bead on the rim MUST be ground down smooth for this tire to seat.
I love the looks and the ride!
:pirat:
the Ricker
the Ricker- Number of posts : 7
Age : 71
Location : Cohutta, Ga.
Registration date : 2009-04-11
Re: 1400 Intruder
what year and model intruder is that?
Steve-O- Moderate user
- Number of posts : 1153
Age : 65
Location : Dallas, TX
Registration date : 2008-02-05
darkside Intruder
Mine is a 1999 1400 Intruder. I have done quite a few modifications to it.
the Ricker
the Ricker
the Ricker- Number of posts : 7
Age : 71
Location : Cohutta, Ga.
Registration date : 2009-04-11
Re: 1400 Intruder
Cool looking bike.
M50- Number of posts : 107
Age : 49
Location : Adrian,MI
Registration date : 2008-07-24
Re: 1400 Intruder
M50, What tire on your M50?? My brother-in-law has one and is considering going Dark.
the Ricker
the Ricker
the Ricker- Number of posts : 7
Age : 71
Location : Cohutta, Ga.
Registration date : 2009-04-11
Re: 1400 Intruder
185/65/15. But, could probably go to a 195/65/15
M50- Number of posts : 107
Age : 49
Location : Adrian,MI
Registration date : 2008-07-24
Re: 1400 Intruder
The tire Ricker is talking about is available through DicountTire.com
You can get more info by clicking here.
So far it has been fitted on the VS1400 (at least three riders) and an M50. The clearance is tight, but it works without any mods on the M50 and possibly none on the VS1400 (I had to make a small clearance increase for height, others have needed nothing).
You can get more info by clicking here.
So far it has been fitted on the VS1400 (at least three riders) and an M50. The clearance is tight, but it works without any mods on the M50 and possibly none on the VS1400 (I had to make a small clearance increase for height, others have needed nothing).
Bug Dr- Number of posts : 2
Location : Central, TX
Registration date : 2009-06-17
Re: 1400 Intruder
BTW: The price is only $56 and it rides SMOOOOOOOOOTH! Grips in the corners better than my ME880 did! I know it is hard to believe, but it is true!
Bug Dr- Number of posts : 2
Location : Central, TX
Registration date : 2009-06-17
Re: 1400 Intruder
Sweet lookin bikes yall.
Badmoon- Number of posts : 1699
Age : 57
Location : Swanpland (Gods Country) It is my horns that hold up my halo.
Registration date : 2007-12-20
Re: 1400 Intruder
what was the original tire size ??? maybe it'll help me figure out what size to go with...... as in MT, i got a 170/80/15
toothpik- Number of posts : 2
Location : texas
Registration date : 2011-07-08
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|