Front Rotor Screws

Anybody have any Front Rotor screws to sell , or know a good place to get them for less than $6 each? My 1300C front wheel didn't come with the rotor and screws. I have an Ebay rotor, but need the screws, now.

ThanX.

KY.......hiway robbery aint it. I purchased the 10mm castle nut on the rear of a 1300C seat...$12..

I feel your pain, but NO I don't know where any are....maybe some of our other members will.


..........bobby

.

Whats wrong with your old ones?

I am trying to setup the new front wheel as a complete unit. I like the spokes and want to be able to put the old tires back on when I am getting tire changes and such, or sell the bike. When I sell it is going to have the factory Spokes, not hard to get, expensive wheels ;-)

I see Harley kits for under $10 a set. I see CBR ones for $5.00 a set. Magna, Shaddow are available as well. I know some guys have more than one bike, I figure you might know what is the same as the VTX bolts.

There has to be a better way than the Steeler or OEM parts.

Yep, Honda is something else, they jack up the prices of their parts. I have purchesed alot of Harley parts, and I can get the HD parts for less than the Honda parts, like cluch baskets and other things. You can get HD hwy. bars for a 1300r or s for about $40 to $50 that dont have a scuff on them, but that is at swap meets.

Wayne

If you can find out if the front and rear take the same bolts I have some rear ones I can hook you up with. If not then there are several dealers of bolts you can get them from cheaper than the mc dealer.



See you out there
Smokey

Im not the one who needs the bolts
Altho I am going to be getting some soon, everytime I change a tire I pull them, I know a guy who bent a rotor, breaking the bead, and I dont take the chance.

From the HONDA Microfiche
http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/1/Make/Honda

Front:
90105-MV9-003 BOLT, DISK (8X24) NEW NUMBER
90105-MBB-000 BOLT (8X24) OLD NUMBER

Rear:
90105-MV9-003 BOLT, DISK (8X24) NEW NUMBER
90105-MBB-000 BOLT (8X24) OLD NUMBER

Looks like the same to me.

KYVTX1300 wrote:From the HONDA Microfiche
http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/1/Make/Honda

Front:
90105-MV9-003 BOLT, DISK (8X24) NEW NUMBER
90105-MBB-000 BOLT (8X24) OLD NUMBER

Rear:
90105-MV9-003 BOLT, DISK (8X24) NEW NUMBER
90105-MBB-000 BOLT (8X24) OLD NUMBER

Looks like the same to me.

Pm me an address and give me a few days to locate them again

See you out there
Smokey

Way to go Smokey!

Your the Best!!!!

I have them in my pocket and will try to get them in the mail this afternoon.


See you out there
Smokey

Here comes an empty box joke .... wait for it ...... wait for it .....