I'm Steppin Over Nexen n2000 205/50/16
+4
Steve-O
Badmoon
horseman8m
BigRedX
8 posters
Page 1 of 1
I'm Steppin Over Nexen n2000 205/50/16
Hello All, Well I'm steppin over to the darkside, However I'v ordered A nice Nexen n2000 205/50/16 tire for my vtx1800c. Mainly because the tread patteren is awesome.Do'es anyone for see a problem with this tire's low profile. I do not have boards on my bike.
BigRedX- Number of posts : 6
Location : Ft.Worth, Tx.
Registration date : 2009-07-25
Re: I'm Steppin Over Nexen n2000 205/50/16
just lowers your top end and make highway speeds run your engine faster.
you will take off quicker tho .
OH and if you hit a tree with the lower profile tire you could damage your bike
I wanted a n2000 but was told that they don't make them anymore, so i went with a Nexen n641, others have gone with the N3000.
just check the date on the tire before you mount it , older tires are out there.
have fun and good luck
Horse
you will take off quicker tho .
OH and if you hit a tree with the lower profile tire you could damage your bike
I wanted a n2000 but was told that they don't make them anymore, so i went with a Nexen n641, others have gone with the N3000.
just check the date on the tire before you mount it , older tires are out there.
have fun and good luck
Horse
horseman8m- Number of posts : 1449
Age : 35
Location : valdosta , GA.
Registration date : 2008-02-09
Re: I'm Steppin Over Nexen n2000 205/50/16
Well whadda think ? Looks freakin awesome and absolutly hassle free. The ride is just as awesome.Look out Darth here I come
BigRedX- Number of posts : 6
Location : Ft.Worth, Tx.
Registration date : 2009-07-25
Re: I'm Steppin Over Nexen n2000 205/50/16
Great job BIG-RED-X.
Welcome to the Darkside
take it easy for a few miles to get used to it and then let the good times roll.
have fun,
Horse
Welcome to the Darkside
take it easy for a few miles to get used to it and then let the good times roll.
have fun,
Horse
horseman8m- Number of posts : 1449
Age : 35
Location : valdosta , GA.
Registration date : 2008-02-09
Re: I'm Steppin Over Nexen n2000 205/50/16
Dude
Dont forget to put your tag back on.
Congrats. Sweet looking tire. ride it for a while and tell us how it is.
Peace
Moon
Dont forget to put your tag back on.
Congrats. Sweet looking tire. ride it for a while and tell us how it is.
Peace
Moon
Badmoon- Number of posts : 1699
Age : 57
Location : Swanpland (Gods Country) It is my horns that hold up my halo.
Registration date : 2007-12-20
Re: I'm Steppin Over Nexen n2000 205/50/16
That's an awesome looking tire. How does it handle? AND where did you find one?
Steve-O- Moderate user
- Number of posts : 1153
Age : 65
Location : Dallas, TX
Registration date : 2008-02-05
Re: I'm Steppin Over Nexen n2000 205/50/16
That looks NASTY!!! I LOVE that tire!!! I have a 1300VTX C, would that tire fit on mine??? And another question, as I'm not the sharpest tool in the shed, what do you mean that the lower profile will make the engine scream on the highway, and what size would be better and not make it scream??? I'm sorry I have no knowledge on this matter, why are there 3 #'s on the tire???
Archangel- Number of posts : 2
Location : St Peters
Registration date : 2009-09-29
Re: I'm Steppin Over Nexen n2000 205/50/16
The three tire numbers are the section width, then the "aspect ratio" and finally the rim size. The width is pretty simple to understand, it's just the widest point of the tire in millimeters. The second number tells you how tall the sidewall is, as a percentage of the width of the tire. The third number is in inches to indicate what size wheel the tire will fit.
To demonstrate I'll use the ideal car tire size: 235/75 15. That tire is 235 millimeters wide, and fits on a 15 inch rim. The sidewall height is 75% of 235 millimeters, or approximately 176mm.
To demonstrate I'll use the ideal car tire size: 235/75 15. That tire is 235 millimeters wide, and fits on a 15 inch rim. The sidewall height is 75% of 235 millimeters, or approximately 176mm.
Oldsmobility- Number of posts : 124
Age : 40
Location : London OH
Registration date : 2009-08-25
Re: I'm Steppin Over Nexen n2000 205/50/16
Olds, Thank you for the explanation, you mentioned Ideal, is that size possible on a 1300??? Also what about the lower profile causing the engine to scream, how can I stay away from that??? Again, I'm sorry for the questions!!!
Archangel- Number of posts : 2
Location : St Peters
Registration date : 2009-09-29
Re: I'm Steppin Over Nexen n2000 205/50/16
LOL, I don't think that tire will fit on any factory bike in existance. I was just joking around, but if you're into full-size cars of the 1960s and '70s, that's the tire size of choice.
The reason that a lower profile tire increases the engine rpm, is because the smaller the diameter of the tire, the smaller its circumferance. That means for each revolution of the tire, you are travelling a shorter distance. Therefore, the shorter the tire is, the more rpms your engine has to turn to go the same speed. Additionally, the more rpms your engine turns, the more fuel you'll be consuming.
Ideally, you'll probably want to pick a tire with a diameter, as close as possible to your factory tire. To match a 170/80 15 motorcycle tire, the closest tire sizes I know of are 195/70 15 and 205/65 15. There are a number of other tire sizes which will fit (and might be better depending on your personal preferences), but vary in diameter slightly.
Don't be sorry to ask questions, there's plenty of people on the forums more than happy to help out.
The reason that a lower profile tire increases the engine rpm, is because the smaller the diameter of the tire, the smaller its circumferance. That means for each revolution of the tire, you are travelling a shorter distance. Therefore, the shorter the tire is, the more rpms your engine has to turn to go the same speed. Additionally, the more rpms your engine turns, the more fuel you'll be consuming.
Ideally, you'll probably want to pick a tire with a diameter, as close as possible to your factory tire. To match a 170/80 15 motorcycle tire, the closest tire sizes I know of are 195/70 15 and 205/65 15. There are a number of other tire sizes which will fit (and might be better depending on your personal preferences), but vary in diameter slightly.
Don't be sorry to ask questions, there's plenty of people on the forums more than happy to help out.
Oldsmobility- Number of posts : 124
Age : 40
Location : London OH
Registration date : 2009-08-25
Re: I'm Steppin Over Nexen n2000 205/50/16
Congrats BigRed enjoy the better and safer ride.
Archangel, check one of the links about tire calculator, like http://www.miata.net/garage/tirecalc.html
There's a;so a sticky regarding this topic, but I prefer this site.
If you want to buy a new tire also check some tires at the shop site by site since there's a lot of difference,
within the same sizes.
The Nexen is a good tire by the way, it was my first DS'er.
Archangel, check one of the links about tire calculator, like http://www.miata.net/garage/tirecalc.html
There's a;so a sticky regarding this topic, but I prefer this site.
If you want to buy a new tire also check some tires at the shop site by site since there's a lot of difference,
within the same sizes.
The Nexen is a good tire by the way, it was my first DS'er.
CaribCruiser- Number of posts : 673
Age : 62
Location : Curacao, Dutch Caribbean
Registration date : 2007-12-16
Re: I'm Steppin Over Nexen n2000 205/50/16
Depending on how wide the wheel is, the closest car tire to a 170/80-15 is going to be a 175/80R-15 like this,Oldsmobility wrote:LOL, I don't think that tire will fit on any factory bike in existance. I was just joking around, but if you're into full-size cars of the 1960s and '70s, that's the tire size of choice.
The reason that a lower profile tire increases the engine rpm, is because the smaller the diameter of the tire, the smaller its circumferance. That means for each revolution of the tire, you are travelling a shorter distance. Therefore, the shorter the tire is, the more rpms your engine has to turn to go the same speed. Additionally, the more rpms your engine turns, the more fuel you'll be consuming.
Ideally, you'll probably want to pick a tire with a diameter, as close as possible to your factory tire. To match a 170/80 15 motorcycle tire, the closest tire sizes I know of are 195/70 15 and 205/65 15. There are a number of other tire sizes which will fit (and might be better depending on your personal preferences), but vary in diameter slightly.
Don't be sorry to ask questions, there's plenty of people on the forums more than happy to help out.
185/75-15 like this....
or a 165/80-15 like this....
frank5079- Number of posts : 4
Location : Winchester, KY
Registration date : 2013-10-19
Similar topics
» NEXEN N2000 205/65/15
» Steppin' Over
» DS & WS TREAD BY BIKE MODEL Pics & Comments - Mar10
» Nexen CP641 205/65/16
» Nexen 5000
» Steppin' Over
» DS & WS TREAD BY BIKE MODEL Pics & Comments - Mar10
» Nexen CP641 205/65/16
» Nexen 5000
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|